OPTEX FA - Laser Sensors - DS Series

·Digital Amplifier with Modular Laser Optics.
·Two independent outputs, high speed response up to 60 µsec.
·Max 70 meter sensing distance (Retro-reflective mode) with co-axial beam light source.
·e-con connector for easy disconnection.

Sensor head
Retro reflective type(Sensing range : 2-8m)·DSR-800(Sensing range : 20-50m)·DSR-5000
Diffuse reflective type(Sensing range : 0.25 -1.5m)·DSD-100
Thru-beam type(Sensing range : 2m)·DSTC-200/-M8(Sensing range : 0.5 - 2m)·DSTA-200/-M8Amplifier·D2SA-M(N/P)/D2SA-M(N/P)3/D2SA-M(N/P)-M8·D2SA-S(N/P)/D2SA-S(N/P)1

Features
6 different teaching mode

One Point Teaching
Use this teaching mode when no target is present. Set the threshold so the sensor does not detect the background.

Two Point Teaching
This is the basic setting method for the DSD-100 Diffuse Reflective type sensor. First teach with the target present and then teach the background. The threshold is then set between the target value and the background.

Automatic Teaching
In this mode there is no reason to stop the conveyor. It is possible to teach the sensor while the product is running.


Transparent Object Teaching
This mode is only for the DSR-800 Retro-Reflective sensor.Teach without the target object so that the sensor is set the maximum sensitivity.The DSR-800 is able to detect transparent film, bottles, glass, etc.


Judgement Teaching
The function is exclusive to the DSTA-200measurement type sensor.Used for judging size and width of an object within the range of +/- 10%. The target can be detected regardless of the position so it is actually Area Teach.


Zone Teaching
Select the detection area. Use the Up / Down buttons to set the area within +/-10%. The size of this area can be increased or decreased after teaching.



For More Information, Please Contact us : sales@advfit.com